Charging Problem solution

Charging solution

number 1
input 6/10 volt with charging connector

number 2
Charging controler / charging IC 6 volt / 3.9 volt

number 3
output with battery connector 1.5 volt to 3.9 volt

number 4
Charging IC to power IC charging showing track

number 5
power IC to battery connector BSI track

number 6
power IC to charging IC on off track

» Charging Problems

number 1
Charging not showing but storing

number 2
Charging showing but not storing

number 3
Charging showing but some error
not charging,charger not supported,re-connect charger.

number 4
Auto charging with out charger

number 5
direct charging

  Charging Problem solution with charging not showing but storing

1 check charger 6 to 10 volt
2 check charging connector
3 check input track with cool testing = open,short,okay
4 check battery connector on diode reading = open,short,okay.
5 check BSI / B.TEMP track with cool testing = open,short,okay.
okay but not working solution
washer disconnect,carrier change,47k thrmash change.

6 charging IC HRC
7 power IC HRC

Charging Problem solution with
Charging showing but not storing

1 check battery or charger
2 check battery connector on diode reading = open,short,okay,50% short
3 check input track with cool testing = open,short,okay
4 charging IC HRC
5 power IC HRC

Charging Problem solution with charging showing but some errors

1 battery or charger change to check original charger or battery
2 check BSI B.TEM track with cool testing = open,short,okay.
3 input track washer protector disconnect then check
4 power IC HRC
5 charging IC HRC

  Charging Problem solution with Auto charging

1 charging connector re-sold or change
2 charging IC disconnect then check
put diode on direct charging